IKEA Hemnes Hat & Coat Stand

The IKEA Hemnes Hat & Coat Stand features a classical and minimal form while adding touches of traditional design details that are all connected by a wide circular base. Carina Bengs designed the stand with a double hook design on each side of the central stand placed at the top and midpoint of the stand. The materials on the IKEA Hemnes Hat & Coat Stand include a steel and polyester coating on the tube and a clear acrylic lacquer for the hooks.

The IKEA Hemnes Hat & Coat Stand has an overall height of 72.875” (185 cm), width of 19.625” (50 cm), and depth of 19.625” (50 cm).

Set of elevation and plan drawings of the IKEA Hemnes Hat & Coat Stand with dimensions for height and diameter

The IKEA Hemnes Hat & Coat Stand features a classical and minimal form while adding touches of traditional design details that are all connected by a wide circular base. Carina Bengs designed the stand with a double hook design on each side of the central stand placed at the top and midpoint of the stand. The materials on the IKEA Hemnes Hat & Coat Stand include a steel and polyester coating on the tube and a clear acrylic lacquer for the hooks.

The IKEA Hemnes Hat & Coat Stand has an overall height of 72.875” (185 cm), width of 19.625” (50 cm), and depth of 19.625” (50 cm).

Common Questions
Common Questions
Common Questions
How high should you hang a coat rack?
A coat rack should be low enough to reach but high enough so no coat touches the ground. ADA standards indicate that 4 feet (122cm) is the maximum height for a coat rack’s position, but this requirement only pertains to public buildings. Many people consider around 5 feet (152cm) to be the best height to hang a coat rack.
How do you hang a coat rack on a plaster wall?
The most ideal way to hang a coat rock is to mountain it directly to the studs, no matter the kind of wall. It is important to find wall framing to support the coat rack but studs can be harder to locate inside the walls of older homes. One can either use a stud finder or drill tiny holes to locate the studs knowing that these marks will be covered up by the rack itself. If unable to attach directly to the studs, anchors can adhere through and past the plaster for extra security. However, the strength of connection depends on what kind of anchor as plastic anchors are not well suited for plaster walls.
How do you make a standing coat rack?
To make a standing coat rack, one will need a wood post around six feet (1.83m) and either wood feet, legs, and angle supports attached together at the base or two feet connected at a half-lap joint at the base of the post. After securing all wood pieces together with screws and wood glue, sand and finish the rack. Attach hooks to the upper part of the post.

Details

*Under Development*

Height: 
72.875” | 185 cm
Width:
19.625” | 50 cm
Depth:
19.625” | 50 cm
Length:
Weight:
Materials
Powder coated steel tubes; zinc hooks; polypropylene caps
Designer
Carina Bengs (IKEA)
Year
2013

Drawings include:
IKEA Hemnes Hat & Coat Stand elevation, elevation (person), plan

Tags

Downloads

Right Click and 'Save As' or 'Save Link As' to Download
Ad Blocker
Enjoy free drawings? We do too! 
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!
Updated on
Furniture