Ramp Handrails - Wall

Wall mounted ramp handrails are handrails used along any accessible ramp that is comprised of walls on one or either side of the run. Curbs are not required if the walls are continuously connected to the ramp surface.

Handrails along both sides of a ramp are required on any ramp system with a rise greater than 6” | 15.2 cm or a horizontal run greater than 72” | 182.9 cm. The top grippable surface of any ramp handrail must be set at a height between 34”-38” | 86.4-96.5 cm above the ramp surface and a minimum clear width of 36” | 91.4 cm must be provided between handrails. When handrails are attached to a wall, an offset gap of at least 1.5” | 3.8 cm must be continuously maintained between the handrail and the wall surface. In situations where a handrail is not continuous, handrails must extend at least another 12” | 30.5 cm parallel to the flat surface of the ramp landing. Inner handrails on a switchback or turned ramp must always be continuous.

Dimensioned drawings of ADA ramp guardrails with wall mounted handrails in elevation and section

Wall mounted ramp handrails are handrails used along any accessible ramp that is comprised of walls on one or either side of the run. Curbs are not required if the walls are continuously connected to the ramp surface.

Handrails along both sides of a ramp are required on any ramp system with a rise greater than 6” | 15.2 cm or a horizontal run greater than 72” | 182.9 cm. The top grippable surface of any ramp handrail must be set at a height between 34”-38” | 86.4-96.5 cm above the ramp surface and a minimum clear width of 36” | 91.4 cm must be provided between handrails. When handrails are attached to a wall, an offset gap of at least 1.5” | 3.8 cm must be continuously maintained between the handrail and the wall surface. In situations where a handrail is not continuous, handrails must extend at least another 12” | 30.5 cm parallel to the flat surface of the ramp landing. Inner handrails on a switchback or turned ramp must always be continuous.

Common Questions
How much space should be provided between a handrail and a wall?
A gap of at least 1.5” | 38 mm must be maintained between a handrail and a wall.
What is the height of a ramp handrail?

Ramp handrails should have their top surfaces set between 34”-38” | 86.4-96.5 cm above the ramp surface.
How far must non-continuous handrails extend at landings?
If handrails are not continuous they must extend at least another 12” | 30.5 cm parallel to the flat surface of the ramp landing.
Common Questions

Details

*Under Development*

Height: 
Width:
Depth:
Length:
Weight:

Handrail Height: 34”-38” | 86.4-96.5 cm above ramp surface
Space Between Handrail and Wall: 1.5” | 3.8 cm
Handrail Extensions (Landings): 12” | 30.5 cm
Clear Width (Minimum): 36” | 91.4 cm between handrails

Drawings include:
Ramp Guardrails - Wall Mounted Handrails side elevation, section, side (wheelchair user), section (wheelchair user)

Downloads

Right Click and 'Save As' or 'Save Link As' to Download
Ad Blocker
Enjoy free drawings? We do too! 
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!
Buildings